I want to backup only the user settings and profiles using USMT.
How we can achieve this and what are the .xml files needed to check this?
Regards, Shishir Kushawaha "If this thread answered your question, please click on "Mark as Answer"
USMT using MDT
↧
↧
Unable to find litetouch.wsf needed for the deployment
Hello,
during restore using a MDT 2012 i get the following error:
There is still a network-connection avaialable....Howto fix this issue?
↧
BSOD 0x000000DA The driver is mismanaging system PTES.
Hi,
I'm getting a "BSOD 0x000000DA The driver is mismanaging system PTES" when trying to deploy Windows 7 x86 and Vista x86 on AMD systems using MDT 2012. It happens right after the first boot windows boot just after the message "Setup is preparing your computer for first use. Checking video performance"
According to my research, it seems related to the video card driver. The system video card is an nvidia and the board is an Asus M5A97. I even try deleting all the nvidia drivers from my drivers folder so it wouldn't try to inject a video driver. Still, the error persist.
I'm also trying to find the most recent hotfix that replace the videoprt.sys file for both Windows 7 x86 and Vista x86.
Any help will be much appreciated.
Thanks,
Alexandre Pitre, MCTS: Win7 Deploying and Office 2010, Deploying
↧
MDT 2012 setup Litetouch oem install with WinRe enabled
Hi,
In the EDT with windows 7: if you installed the image on a pc you have an icon on the desktop for setting up the recovery partition and a sysprep.
And everything is done.
So you have the latest state of the pc in the WinRe Partition.
Im looking since a month for the same task sequenze to do it with win 8 and win 7 in the Microsoft Deployment tool 2012.
Can anyone help please.
I cant find anything about a Litetouch oem install with WinRe embedded like the express deployment toll with win 7.
Thxs for Help
Markus
↧
MDT 2012: Automating task sequence using customsettings.ini (TaskSqeunceID=)
Hi,
I am trying to replicate our Windows 7 build that basically automates a task sequence using the TaskSqeuenceID= within the Rules (Customsettings.ini) but it looks like it is completely ignoring my rules.
The following is a caopy of our customsettings.ini
[Settings]
Priority=SetModel,Default
Properties=ModelAlias
[Default]
OSInstall=N
FinishAction=RESTART
TaskSequenceID=W8EE64OEM
AdminPassword=Password
UserLocale=en-GB
SystemLocale=en-GB
UIlanguage=en-GB
KeyboardLocale=0809:00000809
SkipAdminPassword=YES
SkipApplications=YES
SkipAppsOnUpgrade=YES
SkipBDDWelcome=YES
SkipBitLocker=YES
SkipBitLockerDetails=YES
SkipBuild=YES
SkipCapture=YES
SkipComputerBackup=YES
SkipComputerName=NO
SkipDeploymentType=YES
SkipDestinationDisk=YES
SkipDomainMembership=YES
SkipFinalSummary=YES
SkipLocaleSelection=YES
SkipPackageDisplay=YES
SkipProductKey=YES
SkipSummary=YES
SkipTaskSequence=YES
SkipTimeZone=YES
SkipUserData=YES
SkipWizard=NO
[SetModel]
UserExit=Z-UserExit.vbs
I have found some articles that stated you have to update the DeployWiz_SelectTS.vbs files to add items
Dim sCmd
Set Oshell = createObject("Wscript.shell")
and
sCmd = "wscript.exe """ & oUtility.ScriptDir & "\ZTIGather.wsf"""oItem = oSHell.Run(sCmd, , true)
Any ideas will be greatly appreciated.
↧
↧
Windows Deployment Wizard Failure
When i run \\servername\DeploymentShare$\Scripts\LiteTouch.vbs i get the following error,
FAILURE ( 5610 ): Onwaar: Verify File:\\servername\DeploymentShare$\Boot\LiteTouchPE_X86.wim
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Apply Windows PE.
Unknown error (Error: 000015EA; Source: Unknown)
The execution of the group (State Capture) has failed and the execution has been aborted. An action failed.
Unknown error (Error: 80004004; Source: Unknown)
Failed to run the last action: Apply Windows PE. Execution of task sequence failed.
Unknown error (Error : 000015EA; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
What to do?
Marinus
↧
Recovering details from deployment image
I used MDT to deploy Windows 7 with a bunch of applications. After a hard-drive failure, I no longer have the original deployment directory and have lost everything. I do, however, have the USB key which was used for installations and have all the application packages sat in the Deploy/Applications directory.
Is there anywhere I can look to find the command-line parameters that were configured for each installation? I've search all the files in the Scripts directory but found nothing. Where does LiteTouch look to find information on the available packages and installation parameters? I'll have to start from scratch but was hoping not to have to hunt around for the necessary silent options, etc..
↧
MDT 2012 - Creating A Combined List Of Mandatory Applications And Selectable Applications While Preserving The Installation Order
Hey everyone!
Right now in our environment, I have a list of mandatory applications delivered through a consistent order by using the "MandatoryApplicationsXXX=" line inside the CustomSettings.ini file.
What I'm now looking to do is give the end user the option to de-select SOME of the Applications (not all) within the Deployment Wizard, but still preserve the mandatory properties of certain key applications.
I'm looking to have all options initially checked at the time of the Deployment Wizard, but have the mandatory apps grayed out.
Is it possible to use a combination of ApplicationsXXX= and MandatoryApplicationsXXX= lines within the same CustomSettings.ini file? If not, what would it take to create such an option?
Thanks!!!
-Cory
↧
CustomSetting.ini OU
Hi all,
we have define in our customsetting.ini a different OU for NEWCOMPUTERS
MachineObjectOU=ou=newcomputers,dc=company,dc=de
on this OU there a many appliations (Adobe Reader etc) that we deploy with ActiveDirectory GroupPolicy
It work's fine because we have only one operating system (Windows 7). But now we plan to deploy Server 2012.
is it posible to use other OU (tasksequence) for our server 2012 setup, without modification in the customsetting.ini?
Chris
↧
↧
errors trying to deploy xp sp3 using mdt 2012
I have my xp sp3 iso right off technet and imported it into mdt. I get the following error in the xp setup process "an error occured copying file d1 to C:\$WIN_NT$.~LS\I386\property.dll" the file is missing. If I choose to skip the file I shortly after
get the follow blue screen "file \$WIN_NT.~BT\$OEM$\iaStor.sys could not be loaded the error code is 4
↧
Empty task/Sequence / unattend.xml but error from specialize/Microsoft Windows Shell Setup
Hello,
i have an error for different OS-deployments.
The error also occurs with a new Task-sequence without adding info to the task sequence:
I thought there will be something in customsettings.ini that will occur this error. But also in cs.ini i can`t find any relation:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=YES
MachineObjectOU=OU=MDT,DC=domain,DC=local
SkipCapture=NO
_SMSTSORGNAME=Deploymentshare
SkipCapture=NO
Local Administrator Password
SkipAdminPassword=Yes
ApplyGPOPack=NO
SkipProductKey=YES
SkipDeploymentType=NO
DeploymentType=Newcomputer
SkipDomainMembership=NO
JoinWorkGroup=workgroup
SkipUserData=YES
SkipBuild=NO
SkipComputerName=NO
SkipPackageDisplay=NO
SkipLocaleSelection=YES
SkipTimeZone=YES
SkipApplications=YES
SkipBitLocker=YES
EventService=http://192.168.2.150:9800
SkipBitLockerDetails=YES
SkipSummary=NO
SkipFinalSummary=NO
UserDataLocation=NONE
SkipAppsOnUpgrade=YES
TimeZoneName=W. Europe Standard Time
TimeZone=110
AreaCode=0413
UserLocale=nl-NL
Language=00000413
SystemLocale=00000413
UserLocale=00000413
InputLocale=0413:00020409
InputLocale=nl-US
KeyboardLocale=nl-US
FinishAction=REBOOT
Windows 7 is running well...but windows 8 and server 2012 not!
What is the problem here?
↧
Is it possible to have Refresh and build in one task sequence
Hi,
We are curenntlly upgrading from XP to Windows 7 using SCCM 07 and MDT 2012 U1. Some users will be getting brand new pc's and some will be getting a refresh. At present we have one TS for doing the refresh using USMT offline (hard linking) and one TS for a new build which wipes the hard disk and the users personal folders are replaced manually.
Can anyone tell me if it is possible to have one task sequence for a new build and refresh? Would I have to use a HTA or the User Driven Installation in MDT? I have tried UDI but keep running into issues with restoring the profile and installing apps. The above two TS's work fine.
Thanks
↧
Installed ADK, USB builds now not working
Hi guys, Hope someone may have seen this before and be able to help:
In order to prepare for Windows 8 deployments we have installed the new ADK onto our MDT server. However, now when we generate the usb builds from the media selection in MDT we are unable to build from them.
Comparing one of the new USB content folders to one generated before installing ADK; the content\boot folder contains different files.
When booting from one of the new ADK generate USBs, the WinPE environment will load but it then just opens a command propt sitting on X:\Windows\System32 rather then opening up the task sequence selection window.
MCITP Windows 7 Enterprise Administrator
↧
↧
HP notebooks, enable TPM when using Offline Bitlocker
We're using MDT 2012 Update 1 for deployment of Windows 7 and Windows 8 Enterprise to HP notebooks. I need to enable TPM during the Task Sequence deployment. This blog details the steps
http://deploymentbunny.com/2010/10/18/enable-tpm-via-task-sequence-on-hp-boxes/, but we're using the new Offline Bitlocker feature and this won't work, it happens too late. How can I resolve this?
↧
DISM Error:5 error when building boot ISO with WADK 8 and MDT 2012 sp1
Hi
Environment: Windows server 2008 R2(VM), 2GB RAM, WADK 8, MDT 2012 SP1
When I try to build a boot ISO using either MDT or ImageX, I receive an error when DISM is used to add packages.
Processing 1 of 1 - Adding package WinPE-HTA-Package~31bf3856ad364e35~x86~~6.2.9200.16384
An error occurred - WinPE-HTA-Package Error: 0x80070005
Error: 5
Access is denied.
This repeats for all WINPE packages being added by DISM.
I have rebuilt the server and reinstalled but the same affect. I have tried running it as admin, editing rights and making the name of the packages lower case but cannot seem to get anywhere. Any help would be great.
↧
tasksequence with command line batch file
hello all
I have problem with a simple test batch file under my tasksequence? (without this it work fine).
c:
md Temp
icacls "C:\Temp" /grant everyone:(OI)(Ci)(M) /T
Chris
↧
After MDT 2012 update 1 upgrade..
...from mdt 2012.
Highlights from the SMSTS log:
The execution of the group (Install) has failed and the execution has been aborted. An action failed.Operation aborted (Error: 80004004; Source: Windows)TSManager9/6/2012 12:59:13 PM1304 (0x0518)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015F0; Source: Unknown) TSManager9/6/2012 12:59:13 PM1304 (0x0518)
Task Sequence Engine failed! Code: enExecutionFail TSManager9/6/2012 12:59:13 PM1304 (0x0518)
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
Also.. FAILURE 5616 : Verify BCDBootEx
↧
↧
Clean up drivers in MDT2010?
I imported drivers of all hardware we own and now I have lots of drivers in different versions and also many redundant drivers (1), (2),... (7), (8),.. at all.
And all of them get (if net or storage) get included into bootimages.
Is there an easy way to clean up the drivers?
↧
Problem with Activation Key for Office 2013
I can not find the activation key on the Internet.
Could anyone help me?
↧
MDT2012 Image Deployment Failing During OS Install
This happens randomly (and not that often) for our Windows 7 image and simply reimaging the machine gets the deployment to succeed. We use MDT 2012 with LTI imaging over the network (boot from USB or PXE). Below are the error messages that appear in the smsts.log and bdd.log
BDD.LOG
"
...
About to run command: "\\%SERVERNAMEHERE%\MDTProduction$\Operating Systems\Windows 7 Enterprise x64\Sources\setup.exe" /noreboot /unattend:C:\MININT\unattend.xml /m:"\\%SERVERNAMEHERE%\MDTProduction$\$OEM$"LTIApply11/5/2012 3:22:52 PM0 (0x0000)
ZTI Heartbeat: command has been running for 5 minutes (process ID 224)LTIApply11/5/2012 3:27:00 PM0 (0x0000)
Return code from command = -1073741819LTIApply11/5/2012 3:27:17 PM0 (0x0000)
Setup failed applying image \\%SERVERNAMEHERE%\MDTProduction$\Operating Systems\%FOLDERNAMEHERE%\%WIMFILENAMEHERE%.wim, rc = -1073741819LTIApply11/5/2012 3:27:17 PM0 (0x0000)
FindFile: The file LTIBootstrap.vbs could not be found in any standard locations.LTIApply11/5/2012 3:27:20 PM0 (0x0000)
ZTI ERROR - Unhandled error returned by LTIApply: Invalid procedure call or argument (5)LTIApply11/5/2012 3:27:20 PM0 (0x0000)
Command completed, return code = -2147467259 LiteTouch11/5/2012 3:27:20 PM0 (0x0000)
Litetouch deployment failed, Return Code = -2147467259 0x80004005LiteTouch11/5/2012 3:27:20 PM0 (0x0000)
For more information, consult the task sequencer log ...\SMSTS.LOG.LiteTouch11/5/2012 3:27:20 PM0 (0x0000)
Property RetVal is now = -2147467259LiteTouch11/5/2012 3:27:20 PM0 (0x0000)
Unable to copy log to the network as no SLShare value was specified.LiteTouch11/5/2012 3:27:20 PM0 (0x0000)
...
"
SMSTS.LOG
"
...
Start executing the command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf"TSManager11/5/2012 3:22:36 PM1640 (0x0668)!--------------------------------------------------------------------------------------------!TSManager11/5/2012 3:22:36 PM1640 (0x0668)
Expand a string: WinPEandFullOSTSManager11/5/2012 3:22:36 PM1640 (0x0668)
Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf"TSManager11/5/2012 3:22:36 PM1640 (0x0668)
Process completed with exit code 5TSManager11/5/2012 3:27:20 PM1640 (0x0668)
!--------------------------------------------------------------------------------------------!TSManager11/5/2012 3:27:20 PM1640 (0x0668)
Failed to run the action: Install Operating System.
Access is denied. (Error: 00000005; Source: Windows)TSManager11/5/2012 3:27:20 PM1640 (0x0668)
Sending status message . . .TSManager11/5/2012 3:27:20 PM1640 (0x0668)
...
"
↧
More Pages to Explore .....
