USMT Load breaking Internet Explorer association with HTTP/HTTPS

July 21, 2016, 9:37 am

≫ Next: Failure (5627) Run DISM.exe-Appears to be when I try to do offline updates

≪ Previous: MDT 2013 Deployment - The following network devices do not have a driver installed.

$

0

0

Recently, we have began to notice that when replacing a users computer, and applying the USMT Load, the user is unable to open *.url files or run "start iexplore.exe www.example.com". They just get error message "This file does not have a program associated with it".

So I compared the following registry keys on the old computer a new one: HKLM\SOFTWARE\Classes\http\shell\open

And I can see that the USMT has removed or overwritten the proper values on the new system. See picture.

After examining the LoadState.log file, I can see that the step "Processing APPLY for migration unit: <System>\Network and Internet\Internet Options\Microsoft-Windows-ieframe (CCSIAgent)" is processing the missing registry entries:

2016-07-21 09:43:56, Status                [0x000000] Processing State Microsoft-Windows-IE-InternetExplorer[@version="11.2.9600.18376" and @arch="amd64" and @culture="neutral" and @context="allUsers"]/settings
2016-07-21 09:43:56, Status                [0x000000] Activity: 'MIGACTIVITY_MIGUNIT_APPLY'
2016-07-21 09:43:56, Status                [0x000000]   Argument 1: Settings|http://www.microsoft.com/migration/1.0/migxmlext/cmi/Microsoft-Windows-ieframe/Microsoft-Windows-ieframe/settings||11.2.9600.18376|neutral|amd64
2016-07-21 09:43:56, Status                [0x000000]   Argument 2: EXECUTION_APPLY
2016-07-21 09:43:56, Info                  [0x080000] Processing APPLY for migration unit: <System>\Network and Internet\Internet Options\Microsoft-Windows-ieframe (CCSIAgent)
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP []
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP [AppUserModelID]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP [EditFlags]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP [FriendlyTypeName]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP [Source Filter]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP [URL Protocol]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP [WebNavigableCLSID]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\DefaultIcon
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\DefaultIcon []
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.3gp]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.ASF]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.m2ts]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.mka]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.mks]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.mkv]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.mov]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.mp4]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.oga]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.ogg]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.ogm]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.ogv]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.ts]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.webm]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.WM]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.WMA]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\Extensions [.WMV]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell\open
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell\open [CommandId]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell\open [DontReturnProcessHandle]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell\open\command
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell\open\command []
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell\open\command [DelegateExecute]
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell\open\ddeexec
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell\open\ddeexec []
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell\open\ddeexec\application
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell\open\ddeexec\application []
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell\open\ddeexec\topic
2016-07-21 09:43:56, Status                [0x000000] Processing Registry HKLM\SOFTWARE\Classes\HTTP\shell\open\ddeexec\topic []

So I'm wondering if anybody else has ran into this problem? Is there a way to stop the IE settings from being migrated?

Thanks in advance!

---

Failure (5627) Run DISM.exe-Appears to be when I try to do offline updates

July 21, 2016, 9:48 am

≫ Next: MDT 2013 - Suspend Task Sequence and shut down?

≪ Previous: USMT Load breaking Internet Explorer association with HTTP/HTTPS

$

0

0

Hi, could someone please give me some advice here.  I am trying to apply offline updates to my Windows image.  Long story short, I added a package with Windows 8.1 and added all of the updates for it. When I try to create my image, I Get a Failure (5627) Run DISM.exe 

I dug through the several log files and can see that it is the issue.  I disabled that Windows 8.1 folder and the image creates successfully, so I am 100% sure I am doing something wrong.

Advice?

MDT 2013 - Suspend Task Sequence and shut down?

July 5, 2016, 6:40 am

≫ Next: Stuck on "Sysprep is working...Processing generalize phase Sysprep plugins..."

≪ Previous: Failure (5627) Run DISM.exe-Appears to be when I try to do offline updates

$

0

0

Hi All,

I'm having an issue finding a way to Suspend the task sequence with the "LTISuspend" script and shutdown automatically.

I've tried to amend the ltisuspend script to add a shutdown command at the end but the task sequence fails then.

Any suggestions please? I just need to suspend the task sequence after the OS has installed and shutdown automatically.

Cheers in advance.

Stuck on "Sysprep is working...Processing generalize phase Sysprep plugins..."

June 18, 2016, 11:07 am

≫ Next: Imported custom.wim not showing up in Deployment Workbench

≪ Previous: MDT 2013 - Suspend Task Sequence and shut down?

$

0

0

Windows Server 2012 R2

MDT 2013 Update 2

Windows 10 Pro 64-bit

I built a new server, and I was able to install a brand new Windows 10 Pro 64-bit image on a laptop (HP EliteBook 850 G3) with no errors at all.  Although, it was missing 3 drivers (bluetooth drivers, and NXP NewFieldProximity Provider driver, which were later found by a Microsoft update).  I built my reference computer, and then progressed to capturing it by launching LiteTouch.vbs from my deploymentshare$.  It runs successfully until the "Running action: Execute Sysprep" part.  At this point, I am still able to ping the server, and browse to all folders and files in the deploymentshare$.  However, when I look in Device Manager, I don't see any network adapters (except for the MS Kernel Debug Network Adapter).  When I end the SysPrep tool from task manager, I get the following error message: "Can not find script file '\\SERVER\DeploymentShare$\Scripts\LTICleanup.wsf'."  Then I can no longer ping the server or browse the deploymentshare$  I also get the following Deployment Summary:

FAILURE ( 6111 ): 1: Run Sysprep.exeLitetouch deployment failed, Return Code = -2147467259 0x80004005
No networking adapters found,  The network drivers for your device are not present
SetNamedSecurityInfo() failed.SetObjectOwner() failed.  0x80070005.
RegQueryValueExW is unsuccessful.  0x80070002.
Failed to run the action:  Execute Sysprep.Unknown error (Error: 000017DF; Source: Unknown)
The execution of the group (Capture Image) has failed and the execution has been aborted.  An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Execute Sysprep.  Execution of task sequence failed.
Unknown error (Error: 000017DF; Source: Unknown)Task Sequence Engine failed!  Code: enExecutionFail
Task sequence execution failed with error code 80004005
SetNamedSecurityInfo() failed.
SetObjectOwner() failed.  0x80070005.
RegQueryValueEsW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgramGetTsRegValue() is unsuccessful.  0x80070002.
Error Task Sequence Manager failed to execute task sequence.  Code 0x80004005

Imported custom.wim not showing up in Deployment Workbench

July 21, 2016, 11:51 am

≫ Next: Dual Deployment Shares in MDT 2013

≪ Previous: Stuck on "Sysprep is working...Processing generalize phase Sysprep plugins..."

$

0

0

Imported custom.wim does not show up under Operating Systems inside Deployment Workbench. It does however show up under C:\deploymentshare\operating systems. Have installed new ADK Windows 10 and then MDT 2013 Update 2. Any suggestions?

Dual Deployment Shares in MDT 2013

July 21, 2016, 11:11 am

≫ Next: is there a way to run the MDT console on my system, but have processing done on the remote machine which the deployment share is on?

≪ Previous: Imported custom.wim not showing up in Deployment Workbench

$

0

0

Our company has just decided to start using MDT and WDS. We are currently using Windows 7 but plan on making the move to Windows 10 and they wanted us to use MDT for deployment. I have created 2 deployment shares (one for each OS). Is there going to be a popup dos prompt to select one or the other or will it default?  If necessary I could suspend the Windows 10 while I am imaging Windows 7 models but would like to be able to work both at the same time.

  Any thoughts?

 

is there a way to run the MDT console on my system, but have processing done on the remote machine which the deployment share is on?

July 21, 2016, 12:41 pm

≫ Next: "A connection to the deployment share could not be made. The following networking device did not have a driver installed" - Before booting into LiteTouch x64.

≪ Previous: Dual Deployment Shares in MDT 2013

$

0

0

I've been running MDT locally with the deployment share housed on a removable HD.

I now have a server at my disposal so I was going to move my workflow to that machine. If I only move the deployment share to the server, but run the console on my computer I'm guessing all processioning will be done on my computer and there will be a lot of back and forth over the network.

Is there a way I can have the processing run on the server, while still interact with the console locally, or is installing MDT on the server and working through RDP the only option if I want the processing to be offloaded to the remote machine?

"A connection to the deployment share could not be made. The following networking device did not have a driver installed" - Before booting into LiteTouch x64.

January 5, 2016, 2:07 am

≫ Next: Make MDT net drive invisible

≪ Previous: is there a way to run the MDT console on my system, but have processing done on the remote machine which the deployment share is on?

$

0

0

I know this is a commonly asked question. I believe I've followed all the steps within this guide.

"https://social.technet.microsoft.com/Forums/en-US/3e083173-f5db-48e9-b744-f71b9ca6541c/how-to-debug-missing-drivers-in-mdt?forum=mdt"

The machine I'm trying to build is a Dell OptiPlex 7040, I've downloaded the cab file from the Dell Support page, and I've updated the Deployment Share, and then replaced the .wim file. 

I beg any help!!

---

Make MDT net drive invisible

July 22, 2016, 12:24 am

≫ Next: Error Code 0x800704CF

≪ Previous: "A connection to the deployment share could not be made. The following networking device did not have a driver installed" - Before booting into LiteTouch x64.

$

0

0

When client connects to the MDT server,there is a net drive which is named Z shows in MY COMPUTER.

Is it possible to make the net drive invisible during the proccess of deployment with some tricks in MDT.

I want to prevent people from downloading scripts 

---

Error Code 0x800704CF

April 29, 2014, 1:06 am

≫ Next: Running MDT wizard on Surface Pro truncates column details and buttons

≪ Previous: Make MDT net drive invisible

$

0

0

Hi

I am facing below error while Migration the Windows XP to Windows 8.1 after complete deployment .

Unable to connect to share: The network location cannot be reached. For information about network troubleshooting, see Windows Help.
( 0x800704CF ) , trying to connect without username.

Is any solution to solve this?

---

Shailendra Dev

Running MDT wizard on Surface Pro truncates column details and buttons

March 20, 2014, 10:31 am

≫ Next: Can not locate control file

≪ Previous: Error Code 0x800704CF

$

0

0

I'm having an issue on Surface Pro's when running the MDT wizard.  The screen size of the wizard truncates the heading, body, and button areas.  The heading details overlap each other when more than 1 line is required for heading.  The buttons at the bottom aren't shown; therefore, users have to manually resize the window to show the buttons.  After resizing the window, the buttons are truncated so only 2/3 of the button is visible after the window resize.  I could try resizing with different methods but hoping someone has a quick window.resizeTo and windows.moveTo method they've already used and tested using wizard.hta file.  Does anyone have a quick resolution for sizing the wizard pane?  Using MDT 2013 (Litetouch). 

Can not locate control file

July 22, 2016, 8:26 am

≫ Next: Default System Drive Letter - MDT 2013 U2

≪ Previous: Running MDT wizard on Surface Pro truncates column details and buttons

$

0

0

We have created a new task sequence in MDT 2012 and is using a win 7 image used on a previous ts. The OS deploys but we see the error screen stating that it can not locate control files of 2 previous ts. I see no where in the xml file where these are referenced. Can anyone point me in the right direction into clearing this up? 

Default System Drive Letter - MDT 2013 U2

July 22, 2016, 9:40 am

≫ Next: MDT 2013 U2 UDI Wizard preview not working

≪ Previous: Can not locate control file

$

0

0

After 4 days of searching (and headdesks) I can not find a solution to my problem. I found opposites.

Goal: Install Windows server 2008 and new with the default system drive of M:, Not C:

Things tried.

• Setting osdisk varable to = M
• Disabling disk formatting and make a diskpart script and assign letter M, change install os to target M
• Set OSDPreserveDriveLetter to false
• Edit unattend.xml to have drive configurations in windowspe>setup_netural link

It always goes back to C:

MDT 2013 U2 UDI Wizard preview not working

March 3, 2016, 3:15 am

≫ Next: Disable formatting the disk(s)

≪ Previous: Default System Drive Letter - MDT 2013 U2

$

0

0

Hello. Has anyone else noticed that clicking the UDI Wizard preview does not do anything ?

I have tried on several systems with the same result, nothing happens.

I monitored the activity with process monitor, but the processes it fires seems to exit normally.

---

eshe

Disable formatting the disk(s)

July 23, 2016, 11:19 am

≫ Next: Windows login screen to have English keyboard as the secondary option if langpack got installed

≪ Previous: MDT 2013 U2 UDI Wizard preview not working

$

0

0

Hello,

I want to create an LTI installation. Since we use different workstations with different disk-layouts we would like to partition the disk(s) manually instead of the automatic procedure. Is there a way to achieve this?

For example after entering the computer-name we would like to get a gui for defining the partitions.

Does anyone know how?

Kind Regards,

Jan

---

Jan

---

Windows login screen to have English keyboard as the secondary option if langpack got installed

July 23, 2016, 1:44 pm

≫ Next: Deploy Win10 Image with Secure Boot Enabled on HP Hardware

≪ Previous: Disable formatting the disk(s)

$

0

0

Hi 

I am using MDT 2012 FOR WINDOWS 10 OS

When i install the other languages OS other than english i need to get the English on screen keyboard at the windows login. 

Deploy Win10 Image with Secure Boot Enabled on HP Hardware

July 10, 2016, 4:21 am

≫ Next: TaskSequence dont work after updating from "MTD2010 Update 2" to "MTD2013 Update 2"

≪ Previous: Windows login screen to have English keyboard as the secondary option if langpack got installed

$

0

0

Hi,

I am trying to deploy Custom Win 10 Image using MDT UEFI offline Media on HP Laptop and Destop with SecureBoot enabled.

I had enabled SecureBoot in UEFI with following Option "Legacy Boot disabled and SecureBoot Enabled".  

Drive Partitions in Deployment task sequence are defaults for UEFI i.e. :  EFI, MSR, OS, Recovery.

After Deploying the Image, Win 10 OS still shows  Secure Boot State:OFF under System Information.

When I deploy same iso media over Hyper-V Gen2 VM with secureboot enabled,  OS shows SecureBoot State:ON

Is there something I am missing or other setting required in UEFI\BIOS on HP Hardware before installing Windows 10 Image other than enabling secureboot?

Do we need to install any UEFI tool after installing OS to configure UEFI SecureBoot or create additional Partition like "HP_tools".  http://h20566.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03857419-1

What is recommended way of Booting with USB where SecureBoot is enabled during deployment. Sometimes, I get error message, "Boot Image is not authenticated". Do we directly select the UEFI USB under Boot Menu or we have to select"Boot from File" and select EFI\Boot\Boot64.efi file.

TaskSequence dont work after updating from "MTD2010 Update 2" to "MTD2013 Update 2"

July 25, 2016, 1:48 am

≫ Next: Create WIM unresponsive after 1-4%

≪ Previous: Deploy Win10 Image with Secure Boot Enabled on HP Hardware

$

0

0

Hi there

I had MTD2010 Update 2 on Windows 8.1 x64 for Sysprep and Capture Windows 7 x32 clients on Virtualbox. This worked well except for the settings for IE11. So I decided to update to MTD2013 Update 2. After that TS for Sysprep and Capture can run a wizard, make something, then reboot system and then only "windows starting file ..."

I am doing the same thing as before. But now MDT dont work.

Logs

Create WIM unresponsive after 1-4%

May 11, 2016, 9:59 am

≫ Next: Deployment Failure - thick image - (5627) dism.exe (MDT 2012 Update 1)

≪ Previous: TaskSequence dont work after updating from "MTD2010 Update 2" to "MTD2013 Update 2"

$

0

0

Running MDT 2013 Update 2

Installing Windows 7 x64 in a Hyper-V VM on a Windows 10 Host.  I need to capture the WIM of my Gold Image.

If I look in the captures folder in the deployment share, I can see that 1 or 2 GB of the WIM makes it, so it would not seem to be a network and/or permission issue.

Similar solution works in my home lab; the problem occurs on the real server at work.

What would be the most common issues to cause this?

Thanks!

Deployment Failure - thick image - (5627) dism.exe (MDT 2012 Update 1)

July 25, 2013, 9:13 am

≫ Next: Have Administrator Account disabled during task sequence?

≪ Previous: Create WIM unresponsive after 1-4%

$

0

0

I installed MDT 2012 Update 1 on a new server and was testing it out with our Windows 8 deployment. I captured a thick image which works fine when I boot to Win PE and apply it using dism.

I imported the image into the the deployment share (custom, no setup/sysprep) and created a Custom Task Sequence with just 3 tasks to do a custom format (command line using dism), apply the image (choose specific disk and partition), and restart the computer. However, when I go through the task sequence, it comes up with some errors and appears that it gets sysprepped again because it prompts me to answer questions that weren't a part of my original sysprep (EULA, adding a new user, etc).

Any idea where I need to look to get this fixed? I've shared the BDD.log and LTIApply.log on my SkyDrive.

https://skydrive.live.com/?cid=0FB4C394CC7A79E1&id=FB4C394CC7A79E1%21105

Here's a snip of the results 

<![CDATA[FAILURE (Err): 53: Copy File: C:\MININT\unattend.xml to C:\Windows\Panther\Unattend.xml - File not found
FAILURE ( 5627 ): 2: Run DISM.exe
Litetouch deployment failed, Return Code = -2147467259  0x80004005
Failed to run the action: Install Operating System. 
Unknown error (Error: 000015FB; Source: Unknown)
Failed to run the action: Install Operating System. Execution has been aborted
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015FB; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]>

Please advise.

Thanks in advance.